Follow the steps below to program your XPR 7000 series radio with the Teldio Man Down Application
Items you will need:
- Teldio Programmer: http://files.teldio.com/Teldio_Programmer_setup_3.24.2.exe
-
MDNSettings.xml file: will be sent by Teldio Support
-
MDN License: will be sent by Teldio Support
License set up (one time per computer on which the Programmer is installed)
- Open the Programmer
- Go to File/License
- In the License Key field, copy paste the contents of the key.txt file.
- In the License File field, browse to the provided license.dat file.
- Press Save and then close the window.
Programming steps
- Connect a portable radio to the computer and run the programmer.
- The radio must already be programmed with the Teldio Edited codeplug and/or be on a channel that has the Option Board enabled.
- On the 'Radio' tab type in the Radio ID, Radio IP and press Connect.
- Go to the 'Firmware' tab select 'Auto-Select' and then press Program.
- The Firmware till take about a minute to program and then will restart
- Go to the 'Write' tab and under 'File Location', click on the white space to browse to the MDN Programming file provided and press Write.
- This will write the MDN settings to the radio.
- Disconnect the Radio and power cycle and press the button mapped to Option Board Feature 2 to bring up the MDN menu.